Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating
About Canroon's CR2000 series Electric induction heater 80Kw Air Colled induction
heat treatment machine For Weld Preheating
CR2000 series medium frequency induction heating system is designed and
manufactured by Canroon, specially
for using of welding preheat, post weld heat treatment (DHT dehydrogenation heat treatment, ISR intermediate
stress relief), and joint anti-corrosion coating.
Quick Detail:
Type:Other
Place of Origin:China (Mainland)
Brand Name:Canroon
Model Number:CR2000-080A-14T
Voltage:380V
Current:122A
Rated Capacity:80KW
Rated Duty Cycle:80KW
Weight:201Kg
Usage:induction temperature stress relievers
Certification:CE ISO9001:2009
After-sales Service Provided:Overseas service center available
Process:Induction heating equipment
Input Power:380V,3-Phase
Temperature recorder:6 Channel temperature recorder
Description about Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating :
The new induction preheater CR2000 can be used as an air-cooled
system for temperatures up to 1450º F . The preheater features
multiple
outputs, six control thermocouples to ensure uniform heating,
significantly faster time to temperature than conventional heating,
and an
extremely easy-to-use operator interface that allows the operator
to program ramp and hold temperature times. It also tutors the
operator
to achieve maximum output from the induction coils.
Applications of Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating :
With the introduction of the Intelligent Mobile Induction Preheater
, this simple and cost-effective heating process can be
applied in the following applications to deliver fast and
consistent heat:
- Welding fabrication and construction;
- Preheating of welds;
- Post-weld heat treatment;
- Coating removal;
- Shrink Fit and so on
Specifications of Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating:
Input Amperes at Rated Output | 380V:122A |
Thermal conversion efficiency | More than 90% |
Maximum Rated output | 80KW |
Cooling Mode | Air cooled |
Input Power | 380V 3-Phase,50HZ |
Rated Output | 80KW at 100% duty cycle,1-35KHZ |
TC input | 6 circuit |
Digital Recorder | Optional |
Control Model | Digital Control |
Resonance | Series Resonance |
Temperature | Max 1450°F |
Transportation | By sea or By Air |
Weight | 201KG |
Warranty | 12 Months |
Accessories of Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating:
Our induction heater uses new technology with IGBT module, digital
control, and modular design,
can be used for welding preheat, PWHT, stress relieving, etc, also
efficient for joint anti-corrosion coating.
Customized Inductor of Electric induction heater 80Kw Air Colled induction heat treatment
machine For Weld Preheating:
Canroon provide customized inductor to adapt various workpieces,
and ensure easier operation and higher
working efficiency.
Apart from induction blanket (blanket type inductor), there are
multiple heating inductors for choice
including induction coil/cable, C-type inductor, plate type
inductor, Split-core inductor, O type inductor,
all of which are easily dismountable and reconnected to the power
source. So the power source can
be used for heating workpiece of different size and shape.
Applications of the CR2000 series Electric induction heater is used for welding
preheating and post-heating:
Application industries: offshore platform, power station, oil and gas pipeline
construction, etc
Applications: pipe welding preheat, PWHT/ post weld heat treatment, joint
anti-corrosion coating, etc
Features:digital control, self-fault diagnosis, modular design, fault code
feedback, high efficiency, etc
Competitive Advantage:
1.Versatile Mobility:optional running gear designed for
construction and maintenance
2.On-board temperature control:provide for manual or temperature
based programming in a simple-to-learn operator interface
3.Muitiple control thermocouple inputs:available to control on the
hottest TC during heating and coolest TC during cooling for
4.uniform heating and quanlity
5.Open output detection:prevents system operation without a covered
output receptacle(cable or protective plug)
6.Isolation fault protection:provides automatic system shut down
power source output to ground.
7.Low consumable costs:No fuel costs and minimal insulation
costs.insulation is resuable and may be used 50 time or more,
reducing costs of disposal and replacement.
8.Uniform heating:maintained along and through the heat zone by
using induction to heat within the material.the surface of
the part is nor marred by localized conducted heat at higher than
specified temperatutes.
9.Time-to-temperature:faster than conventional processes due to
methed of applying the heat,reducing the heating heating recyle
time.
10.Improved working environment: With welding,welders are not
exposed to open flame,explosive gases and hot elements associated
with fuel gas heating and resistance heating.
11.High energy-efficeent systems:(more than 90 percent
efficient)transfers more energy to the part,decreassing heating
times and impoving power efficietnt.
12.Easy Set-up:achieved using preheat blankets or flexible heating
cables combined with user-friendly insulation blankets.
FAQ:
1. Are you a trading company or manufacturer?
We are manufacturer in Shenzhen, China, specialized in portable water cooling induction heater/induction
heating machine for many years.
2. What's the delivery time for sample and bulk order?
Normally for machines in stock, will deliver within 5 days, if not,
7-30 days according to your order.
3. What's your quality guarantee period?
12 months warranty
4. Can I get a lower price if I order large quantities?
Of course. Cheaper price with larger quantity
5. can you customize the machine for us?
Yes, of course, just tell me your detailed requirement, so I can
suggest you most suitable model.
Tag:Induction Preheater
